Wyrestorm NHD-210-RX – HDMI over IP 1080p, H.264 Decoder, PoE, RS-232, CEC, Matrix/Videowall


1 i lager

4 414kr inkl. moms

1 i lager

The NHD-210-RX decoder offers matrix switching and video wall functionality up to 4×4 screens when paired with an NHD-200-TX encoder for multi-format input transmissions of DVI, HDMI, Component and VGA including HDMI and analog audio breakout outputs.The NetworkHD 200-Series is WyreStorms current flagship HD-Over-IP AV distribution platform, sharing many of the same benefits as its smaller sibling, the 200-Series offers configurable high quality, low-bandwidth H.264 compression supporting 1920x120060fps at 40Mb/s and below, and instant switching between sources with both high and low latency modes, but with powerful video wall functionality over LAN that makes it the best all-round solution for commercial AV installations.Key Features– Multi-format HD over IP AV distribution solution utilising H.264 compression for matrix switching – Offers video wall functionality up to 4×4 screens and matrix switching – HDMI and analog audio breakout outputs – Instant switching between video sources with both high quality and low latency modes – Plug and Play configuration with auto IP addressing and Bonjour discovery of componentsFeatures– Highly scalable, high quality low-bandwidth solution using the most efficient compression technologies to allow for very large commercial AV deployments – Offers video wall functionality up to 4×4 screens – Matrix switching functionality – Compatible with NHD-000-CTL controller and NHD-200-TX encoder – Plug and Play setup with quick networking configuration and auto discovery of components – Quick Sync technology for virtually instantaneous seamless switching – Full RS232 control of connected displays and CEC One-Touch Play – Major control systems drivers available including the WyreStorm Enado Control System – Supports video previewing on a PC or third party device. Capable of outputting two simultaneous IP streams. One large IP stream supports a streaming resolution from 480p 60Hz to 1920 x 1200 60Hz to view a video on the decoder. The other small one supports resolutions of 352 x 288 5Hz to easily preview a video from the encoder on a PC or Mac – Use with the new NetworkHD controller NHD-000-CTL for matrix control and management via the LAN, as well as for allowing control from third party control system such as AMX, Crestron, Control4, RTI & Enado. – Supports PoE to be remotely powered by compatible power source equipment, eliminating the need for a nearby power outlet – Standards-based H.264/MPEG-4 AVC video compression – Full PC control suite available free of charge at wyrestorm.com – Supports HDCP – Supports the H.264 features baseline profile, main profile and high profile – Auto input format detection – Configurable encoding bit rate up to 40 Mbps – Supports PoE for remote powered from the switch, eliminating the need for a nearby power outlet – Supports AutoIP, zero-configuration networking zeroconf, a set of technologies that automatically assigns dynamic IP addresses to the Encoder on start-up and a server-less method of choosing IP addresses In the Box1 x NHD-210-RX Main Unit 1 x Power Adapter 12V 1A DC 1 x Detachable Plug 3 x Phoenix Conn. Male, 3.5 mm, 3 pins 2 x Mounting Brackets 1 x Quickstart guide

Artikelnr: 814303013229 Kategorier: , Tagg:
Dimensioner30.8 × 17.8 × 16.9 cm
Vikt (kg)






EAN nummer