,

Wyrestorm NHD-100RX – HDMI over IP 1080p, H.264 Decoder, PoE, RS-232, CEC, Matrix

Availability:

2 i lager


2 992kr inkl. moms

2 i lager

The NetworkHD 100-Series is a matrix-based H.264 HD over IP AV distribution platform. With its simple system configuration and robust feature set, it provides the best value in networked video distribution, without compromising quality.The NHD-100-RX H.264 decoder is intended for use with an NHD-100-TX H.264 encoder sold separately to provide a complete end-to-end streaming system.Key Features– Highly scalable, high quality low-bandwidth solution using the most efficient compression technologies to allow for very large commercial AV deployments – Streams HDMI over IP networks – Plug and Play setup with quick networking configuration and auto discovery of components – Quick Sync technology for virtually instantaneous seamless switching – Full RS232 control of connected displays and CEC One-Touch Play – Major control systems drivers available including the WyreStorm Enado Control SystemFeatures– For use with the NHD-100-TX H.264 encoder to provide a complete end-to-end streaming system – Features 1 x LAN PoE input to 1 x HDMI output – Provides streaming output via Ethernet port – Supports input signal resolution up to 1920 x 120060Hz – Highly scalable, high quality low-bandwidth solution using the most efficient compression technologies to allow for very large commercial AV deployments – Plug and Play setup with quick networking configuration and auto discovery of components – Quick Sync technology for virtually instantaneous seamless switching – Full RS232 control of connected displays and CEC One-Touch Play – Major control systems drivers available including the WyreStorm Enado Control System – Supports video previewing on a PC or third party device. Capable of outputting two simultaneous IP streams. One large IP stream supports a streaming resolution from 480p 60Hz to 1920 x 1200 60Hz to view a video on the decoder. The other small one supports resolutions of 352 x 288 5Hz to easily preview a video from the encoder on a PC or Mac – Use with the new NetworkHD controller NHD-000-CTL for matrix control and management via the LAN, as well as for allowing control from third party control system such as AMX, Crestron, Control4, RTI & Enado. – Supports PoE to be remotely powered from the switch by compatible power source equipment, eliminating the need for a nearby power outlet – Standards-based H.264/MPEG-4 AVC video compression – Full PC control suite available free of charge at wyrestorm.com – Supports HDCP – Supports the H.264 features baseline profile, main profile and high profile – Auto input format detection – Configurable encoding bit rate up to 40 Mbps – Supports AutoIP, zero-configuration networking zeroconf, a set of technologies that automatically assigns dynamic IP addresses to the Encoder on start-up and a server-less method of choosing IP addresses In the Box1 x NHD-100-RX Main Unit 1 x Power Adapter 12V 1A DC 1 x Detachable Plug 3 x Phoenix Conn. Male, 3.5 mm, 3 pins 2 x Mounting Brackets 1 x Quickstart Guide

Artikelnr: 814303013182 Kategorier: , Tagg:
Dimensioner31.9 × 18.2 × 8.1 cm
Vikt (kg)

1.034

Producent

WyreStorm

Modellnummer

NHD-100-RX

EAN nummer

814303013182

Artickelnummer

2350966